capture card frame grabber video processor datapath pixell blackmagic black magic video wall porcessor wall controller data wall processor data wall controller magewell epiphan Express7-G3 ">
Copyright 1999-2021
Pixell worlds largest Datapath distributor. Pixell sells to dealers, resellers, system integrators and end users. Pixell rents x4 units. Buy it now here. Capture Cards, Frame Grabber, Video Processors rental dealer purchase overnight
Express7-G3 Backplane
    * 7 slot, Gen.3 PCI Express backplane
    * Four x8 slots and three x16 slots
    * 1x PICMG 1.3 SBC slot for host CPU
    * 12V power connectors to support high power graphic cards
    * Standard ATX form factor
    * Support for multiple backplanes for large systems
    * Temperature sensors monitored by Datapath Wall Monitor        
    * 96 lanes PCI Express 3.0 switch
    * Support for 2x SATA connections
    * Provides headers for (1, 2 or 3) fans
USD $2050.00 In-Stock

The Datapath Express7-G3 backplane provides four x8 lane PCI Express 3.0 slots typically intended for hosting input cards, and three x16 lane PCI Express 3.0 slots targeted for hosting output cards.

The Express7-G3 can be used with a standard PICMG 1.3 single-board computer (SBC) as a stand-alone system or in combination with multiple backplanes to provide a PCI Express expansion system for a standard PC.

Connecting Multiple Express7-G3 Backplanes

The four x8 PCI Express slots in the master chassis (containing the SBC) can be populated with a HLink-G3 card. Each HLink-G3 is then connected to an expansion chassis using an ExCable-G3 and SLink-G3 card. This configuration provides a high number of available PCI Express slots supporting low latency. The Express7-G3 can be used to connect a mixture of multiple Datapath Express7-G3, Express9 and Express9-G3, and Express11-G3 backplanes.

Daisy Chain Configuration

Expansion Link - HLink-G3, ExCable-G3 and SLink-G3

The SLink-G3 card can be used instead of a PICMG 1.3 SBC to configure the Express7-G3 as an expansion backplane from a standard PC or from other Datapath backplanes. The cards are available with Gen.3 compatibility, fully supporting the Datapath Express7-G3 backplane.
Daisy Chain Configuration
Models Options
Product Name/Order Code Description
Express7-G3 7 slot PCI Express Gen.3 expansion backplane

Express7-G3 Specification
Max Power (without SBC) 25W
Power Requirements Max current at +3.3V < 0.5A
Max current at +12V < 0.5A
Max current at +5V < 4A
Form Factor PICMG1.3 Host SBC interface (x16 PCIe)
3x PCI Express (x16) expansion slots
4x PCI Express (x8) expansion slots
ATX PSU 1 x 24 pin power connectors
8 x 8 pin AUX power connectors
SATA Ports 2 x ports via PICMG1.3 interface
USB Ports 2 x ports via PICMG1.3 interface (USB 2.0)
Operating Temperature 0 to 35°C / 32 to 95°F
Storage Temperature -20 to 70°C / -4 to 158°F
Relative Humidity 5% to 90% non-condensing

We are continuously developing the technology used within our product ranges delivering outstanding innovative solutions, therefore the specification may change from time to time.