USD $529.00 Available
VisionLC-HD
VisionLC-HD2
VisionLC-SDI
USD $759.00 Available
USD $575.00 Available
Single HDMI capture channel
Up to 297 Mpixel/s clock capturing up to 4096x2160p @ 30fps
800 MB/s DMA bandwidth
High performance up and down scaling
Colour space conversion to support output formats
PCI Express Gen 1 x 4 low profile
Datapath unified Windows® and Linux® driver support
Capture Channel 1
HDMI capture channel
297Mpixel/s maximum TMDS clock frequency
4096x2160 @ 30Hz 4:4:4
Capture Channel 2
HDMI capture channel
165MHz maximum TMDS clock frequency
1920x1080p @ 60Hz 4:4:4
1.6GB/s total DMA bandwidth
High performance up and down scaling
Colour space conversion to support any output format
PCI Express Gen 2 x 4 low profile
Datapath unified Windows® and Linux® driver support
Single SDI capture channel
SD/ HD/ 3G at 60 fps
800 MB/s DMA bandwidth
High performance up and down scaling
Colour space conversion to any output formats
PCI Express Gen 1x4 low profile
Datapath unified Windows® and Linux® driver support
Features:
Features:
Features:
Single channel "LiveStream:Capture" card
Discreet video capture is now the mainstay of many small form factor appliances being used in markets such as lecture capture, distance learning and medical environments. Datapath's VisionLC-SDI provides tri-band SDI capture for use within such applications. Datapath's LiveStream:Capture architecture allows captures video to be processed and delivered in real time to a processor or graphics card.
This VisionLC-SDI supports on board colour space conversion and scaling, providing the ability to efficiently transfer the video signal in a suitable format for rendering or encoding applications. The VisionLC-SDI natively supports 32, 24, 16 and 12 bit YUV and RGB formats.
Multi-application capture
The VisionLC-SDI capture card has been designed for use within application models such as:
A few example applications:
Medical environments
Simulation systems
Live events
PC and gaming console capture
Lecture and presentation capture
RealTime streaming
It is also possible to put more than a single card into a system for multiple capture channels.
Due to the nature of the LiveStream:Capture architecture, the VisionLC-SDI s not supported for wall controller applications that depend on Datapath's MultiStream technology.
Video streaming
Built upon the Microsoft AV stream model, VisionLC-SDI inputs can be accessed and enumerated in any DirectShow or Media Foundation supported application. A video for Linux (V4L) driver package is also available to download.
Tested applications includes:
Microsoft Media Encoder
VLC
Telestream WireCast
vMix
Opencast Matterhorn
VidBlaster
OBS Project
Adobe Flash Media Encoder
Dataton Watchout
Specification of the VisionLC-SDI Video Capture Card:
Board Format
PCIe Gen 1 x 4 plug-in card
Dimensions
103mm x 64mm (l x h)
Connector
SDI-BNC
Maximum Capture Resolution
SD/ HD/ 3G at 60 fps
Transfer Rate
800MB maximum DMA transfer rate
Input Mode Detection:
Supports SMPTE-352 Payload identifiers
Hardware Colour Space Conversion 30 / 24 / 16 bit RGB (4:4:4)
16 bit YUV (4:2:2)
12 bit YUV, NV12, YV12 (4:2:0)
Audio Support
Stereo pair PCM audio via each SDI channel at 16 bits in depth, sampling options include 44.1/ 48/ 96 kHz
Video Modes SD-SDI (480i/ 576i) ST-259, EBU 3276
HD-SDI (up to 1080i) ST-260, 274, 296
3G-SDI (up to 1080p) ST-274, 296
2k Digital Cinema modes ST 2048-2
Low Latency
LiveStream:Capture
Single frame time plus DMA transfer of final line
Operating Sysytem Support
Linux,
Windows® XP, Windows Vista, Windows Server 2003, Windows Server 2008, Windows 7, Windows 8/8.1 and Windows 10
Power Requirements
Max current at 1A at 3.3V
Max power ≈ 3.3W
Operating Temperature
0 to 35 deg C/ 32 to 96 deg F
Storage Temperature -20 to 70 deg C (-4 to 158 deg F)
Relative Humidity 5% to 90% non-condensing
Analog audio not supported
Warranty 3 years
We are continuously developing the technology used within our product ranges delivering outstanding innovative solutions, therefore the specification may change from time to time.
Dual channel "LiveStream:Capture" card
Discreet video capture is now the mainstay of many small form factor appliances being used in markets such as lecture capture, distance learning and medical environments. Datapath's VisionLC-HD2 provides a dual channel, high definition HDMI capture card for use within such environments.
Datapath's LiveStream:Capture architecture allows captured video to be processed in real time to a processor or graphics card. The VisionLC-HD2 supports on board colour space conversion and scaling, providing the ability to efficiently transfer the video signal making it suitable for rendering or encoding applications.
The VisionLC-HD2 natively supports 32, 24, 16 and 22 bit YUV ad RGB formats.
Multi-application capture
The VisionLC-HD2 capture card has been designed for use within application models such as:
Medical environments
Simulation systems
Live events
PC and gaming console capture
Lecture and presentation capture
Real time streaming
It is also possible to put more than a single card into a system for multiple capture channels.
Due to the nature of the LiveStream:Capture architecture, the VisionLC-HD2 is not supported for wall controller applications that depend on Datapath's MultiStream technology.
Video Streaming
Built upon the Microsoft AV stream model, VisionLC-HD2 inputs can be accessed and enumerated in any DirectShow or Media Foundation supported application. A video for Linux (V4L) driver package is also available to download.
Tested applications includes:
Microsoft Media Encoder
VLC
Telestream WireCast
vMix
Opencast Matterhorn
VidBlaster
OBS Project
Adobe Flash Media Encoder
Dataton Watchout
Specification of the VisionLC-HD2 Video Capture Card:
Board Format
PCIe Gen 2 x 4 plug-in card
Dimensions
103mm x 64mm (l x h)
Connectors
2 x HDMI
Pixel Rate Channel 1 - 297 Mpixel/s
Channel 2 - 165 Mpixel/s
Max Capture Resolution Channel 1 - 4096x2160p @ 30Hz
Channel 2 - 1920x1080p @ 60Hz
Transfer Rate
1.6GB maximum DMA transfer rate
Hardware Colour Space Conversion 30 / 24 / 16 bit RGB (4:4:4)
16 bit YUV (4:2:2)
12 bit YUV, NV12, YV12 (4:2:0)
Audio Support
Stereo pair PCM audio via each HDMI channel at 16 bits in depth, sampling options include 44.1/ 48/ 96 kHz
Low Latency
LiveStream:Capture
Single frame time plus DMA transfer of final line
Operating Sysytem Support
Linux.
Windows® XP, Windows Vista, Windows Server 2003, Windows Server 2008, Windows 7, Windows 8/8.1 and Windows 10
Power Requirements
Max current at 1.5A at 3.3V
Max power ≈ 5W
Operating Temperature
0 to 35 deg C/ 32 to 96 deg F
Storage Temperature -20 to 70 deg C (-4 to 158 deg F)
Relative Humidity 5% to 90% non-condensing
Analog audio not supported
Warranty 3 years
We are continuously developing the technology used within our product ranges delivering outstanding innovative solutions, therefore the specification may change from time to time.
Single channel "LiveStream:Capture" card
Discreet video capture is now the mainstay of many small form factor appliances being uses in markets such as lecture capture, distance learning and medical environments. Datapath's VisionLC-HD provides HDMI capture for use within such applications.
Datapath's LiveStream:Capture architecture allows captured video to be processed and delivered in real time to a processor or graphics card. The VisionLC-HD supports on board colour space conversion and scaling, providing the ability to efficiently transfer the video signal in a suitable format for rendering or encoding applications. The VisionLC-HD natively supports 32, 24, 16 and 12 bit YUV and RGB formats.
Multi-application capture
The VisionLC-HD capture card has been designed for use within application models such as:
Medical environments
Simulation systems
Live events
PC and gaming console capture
Lecture and presentation capture
Real time streaming
It is also possible to put more than a single card into a system for multiple capture channels.
Due to the nature of the LiveStream:Capture architecture, the VisionLC-HD is not supported for wall controller applications that depend on Datapath's MultiStream technology.>
Video streaming
Built upon the Microsoft AV stream model, VisionLC-HD inputs can be accessed and enumerated in any DirectShow or Media Foundation supported application. A video for Linux (V4L) driver package is also available to download.
Tested applications includes:
Microsoft Media Encoder
VLC
Telestream WireCast
vMix
Opencast Matterhorn
VidBlaster
OBS Project
Adobe Flash Media Encoder
Dataton Watchout
Specification of the VisionLC-HD Video Capture Card:
Board Format
PCIe Gen 1 x 4 plug-in card
Dimensions
103mm x 64mm (l x h)
Connector
HDMI
Pixel Rate 297 Mpixel/s
Maximum Capture Resolution
4096x2160p @ 30Hz
Transfer Rate
800MB maximum DMA transfer rate
Hardware Colour Space Conversion 30 / 24 / 16 bit RGB (4:4:4)
16 bit YUV (4:2:2)
12 bit YUV, NV12, YV12 (4:2:0)
Audio Support
Stereo pair PCM audio via each HDMI channel at 16 bits in depth, sampling options include 44.1/ 48/ 96 kHz
Low Latency
LiveStream:Capture
Single frame time plus DMA transfer of final line
Operating Sysytem Support
Linux,
Windows® XP, Windows Vista, Windows Server 2003, Windows Server 2008, Windows 7, Windows 8/8.1 and Windows 10
Power Requirements
Max current at 1A at 3.3V
Max power ≈ 3.3W
Operating Temperature
0 to 35 deg C/ 32 to 96 deg F
Storage Temperature -20 to 70 deg C (-4 to 158 deg F)
Relative Humidity 5% to 90% non-condensing
Analog audio not supported
Warranty 3 years
We are continuously developing the technology used within our product ranges delivering outstanding innovative solutions, therefore the specification may change from time to time.