VP-90B Video Processor
Optimised for 3x3 video wall arrays
The Pixell VP-90B is an economical display wall controller that connects to the DVI or HDMI digital output of any HDMI video source and stretches the image across 4, 6 or 9 screen arrays. High Definition Content Protection (HDCP) is supported. Each screen displays a quarter, sixth or ninth of the original computer image in a 2x2, 3x3, 3x2 or 3x3 array format as shown below. It is a hardware device that runs in real time with no operating system.
The VP-90B will accept any resolution below and scale that image across 9 displays in a 3x3 array, or 6 displays in a 3x2 or 2x3 array or 4 displays in a 2x2 array. In addition it can show the input signal in a 1x1 format showing the input signal on each display as below. (If less than a 3x3 is being scaled, remaining outputs show source signal full size) (If 3x2 or 2x3 array is being driven, source signal will be cropped to maintain aspect ratio)
With mullion compensation Without mulllion compensation
Input Resolution HDMI / DVI Output Resolution HDMI / DVI
1280 x 720 1024 x 768
1920 x 1080 1360 x 768
HDCP is supported. 1366 x 768
1280 x 1024
1920 x 1080
Mullion compensation up to 20% of screen.
VP-90 Physical Dimensions 295mm (11.6”) wide x 65mm (2.55”) high x 192mm (7.55”) deep
Operating Temperature Range 32 - 95 DegF
Power Requirements 12 volts DC, 25 watts
Cooling No fans, passive cooling.
Source signal Input 1 x HDMI digital connector
Display outputs 9 x HDMI digital connectors
Audio Output 3.5mm stereo analog stripped from HDMI source
Power connector 5.5mm barrel connector, locking
VP-90-PSU Dimensions 50mm (1.96”) wide x 30mm (1.18”) high x 112mm (4.40”) deep.
Input power 100-240VAC 50-60 Hz World wide power supply, 40 watts.
Operating Temperature 32 - 95 DegF
Output power 12V DC at 3.3 amps (max)